





Problem & Solution
Maintaining stable climate conditions in enclosed spaces like greenhouses, terrariums, or fermentation chambers is notoriously difficult with basic timer plugs or manual switches. Ambient room temperatures fluctuate throughout the day and night, risking damage to sensitive plants, reptiles, or biological cultures if temperatures drift too high or low.
The INKBIRD ITC-308 digital outlet controller addresses this issue by providing a plug-and-play dual-stage system. It independently controls separate heating and cooling apparatuses based on real-time probe readings, keeping environmental parameters regulated without manual switching.
Who Is It For?
This controller is tailored for greenhouse managers, indoor growers, reptile keepers, aquarium hobbyists, and individuals running precise temperature-controlled setups such as sourdough starter boxes, kombucha vessels, or microbial fermentation chambers.
Key Features
- Dual Relay Output — Allows simultaneous connection of heating and cooling devices for automated climate balance.
- Dual Display Windows — Displays target setpoint temperature and current measured temperature concurrently for immediate status visibility.
- Alarm Notification — Triggers visual and auditory alerts if the temperature exceeds defined high/low thresholds or if sensor faults occur.
- Temperature Calibration — Includes built-in offset calibration to adjust sensor alignment against reference thermometers.
- Compressor Delay Protection — Offers programmable refrigeration delay intervals to safeguard cooling equipment compressors from rapid cycling.
Technical Specifications
| Model | INKBIRD ITC-308 |
| Control Mode | Dual Relay Output (Heating and Cooling) |
| Display Type | Dual LED Readout (Set Temperature & Measured Temperature) |
| Temperature Units | Switchable (Fahrenheit / Celsius) |
| Safety Features | High/Low Temp Alarms, Sensor Error Alarm, Compressor Delay |
| Installation Type | Plug and Play Pre-wired Outlet |
Pros & Cons
Pros
- Pre-wired plug-and-play design eliminates complex custom electrical wiring
- Dual outlets support heating and cooling equipment simultaneously
- Independent high/low limit alarms prevent thermal runaways
- Dual LED screens show current temperature and target setpoint at a glance
Cons
- Wired temperature probe requires careful positioning to avoid physical damage
- Maximum electrical load must be carefully matched to local voltage and device wattage
- Single-zone control only; cannot control multiple separate chambers independently
FAQ
Yes. It features dual relay outlets, enabling it to power on the heating device when temperatures drop below the set threshold and switch on the cooling device when temperatures rise above it.
It is commonly used for greenhouses, terrariums, aquariums, reptile enclosures, seed germination mats, and temperature-controlled food fermentation environments.
Yes, configured settings and target setpoints remain saved in memory even if electrical power to the unit is interrupted.
The sensor probe head is designed to be submerged in liquids, making it suitable for water tanks, aquariums, or liquid vessels, though the main display body must remain dry.
Final Verdict
The INKBIRD ITC-308 is a solid choice for anyone needing reliable dual-stage temperature control for environmental enclosures, plants, or liquid culture setups. If you need single-zone plug-and-play automation for heating and cooling, it fits the requirement well. However, if you require multi-zone regulation or high-amperage industrial loads, verify your specs before purchase.