





ELEGOO PLA+ Filament 1.75mm Review: Top Choice for FDM Printing
Problem & Solution
Standard PLA filaments can suffer from excessive brittleness, layer delamination, and feeding snags on poorly wound spools, leading to ruined prints and wasted printing time. Makers and print farm operators frequently encounter print failures when working with sub-par material consistency.
ELEGOO PLA+ Filament addresses these common FDM printing hurdles by utilizing an upgraded PLA+ formulation designed for improved layer adhesion and structural toughness. Delivered on a standard 1kg (2.2 lbs) spool with a 1.75mm diameter, it provides reliable feeding across a wide range of open-material FDM 3D printers.
Who Is It For?
Ideal for 3D printing hobbyists, makers, educators, and print farm operators who require standard 1.75mm material for everyday prototyping, functional components, and display models.
Suitable for users operating open-format FDM printers who want a balance of straightforward printability and enhanced mechanical strength compared to traditional entry-level PLA.
Key Features
- PLA+ Enhanced FormulationDelivers improved toughness and layer adhesion over basic PLA materials.
- Standard 1.75mm DiameterOffers broad compatibility with most desktop FDM 3D printer extruders.
- 1KG (2.2 Lbs) Spool CapacitySupplies sufficient material volume for extensive printing projects and print batches.
- Universal FDM Machine CompatibilityWorks seamlessly with bowden and direct-drive open-material printing setups.
- Moisture-Protected PackagingHelps preserve initial filament quality before unboxing for immediate setup.
Technical Specifications
| Material Type | PLA+ (Polylactic Acid Plus) |
| Filament Diameter | 1.75 mm |
| Spool Net Weight | 1 kg / 2.2 lbs |
| Printer Technology | FDM / FFF (Fused Deposition Modeling) |
| Hardware Compatibility | Compatible with most 1.75mm FDM 3D printers |
| Spool Quantity | 1 Spool |
| Dimensional Tolerance | Not specified in available data |
| Recommended Print Temperature | Not specified in available data (Standard PLA+ ranges apply) |
Pros & Cons
Pros
- Standardized 1.75mm size integrates easily with standard desktop FDM extruders
- PLA+ formulation offers improved layer bonding compared to standard PLA
- Generous 1kg spool weight suitable for large-format or multi-part prints
- Broad hardware compatibility across open-source 3D printer brands
Cons
- Exact dimensional tolerance limits (e.g., +/- 0.02mm) are not explicitly specified in available product data
- Like all PLA variants, requires dry storage after opening to maintain optimal print performance
FAQ
It is compatible with virtually all standard FDM 3D printers that accept open 1.75mm filament spools.
Each spool contains 1 kg (approximately 2.2 lbs) of 1.75mm PLA+ filament material.
Specific nozzle temperatures are not detailed in the raw product specifications; standard PLA+ printing ranges (typically between 190°C and 220°C) generally apply depending on your hotend setup.
PLA+ formulations generally incorporate modifiers to enhance impact resistance, reduce brittleness, and provide better layer adhesion than basic PLA filaments.
Final Verdict
Recommended for FDM 3D printing enthusiasts looking for a dependable 1.75mm PLA+ spool for general modeling, functional brackets, and rapid prototyping. Skip if your application specifically demands high-temperature engineered plastics like ABS or Nylon. Verify current availability and local listing pricing before ordering.