Problem & Solution
Loose jumpers, exposed solder joints, and haphazard wiring harnesses often lead to short circuits, signal dropouts, and frustrating troubleshooting during DIY electronics assembly. Standard breadboard jumper wires frequently pop out of place when modules or sensors are moved around during testing.
This 230-piece 2.54mm JST-PH style connector kit provides a modular terminal solution. By combining multi-pin plastic housings with female pin header terminals, users can construct clean, custom-length wiring harnesses. This allows modular connection and quick disconnect capability for sensors, microcontrollers, and custom circuit boards without permanent soldering.
Who Is It For?
Electronics hobbyists, robotics builders, repair technicians, and circuit designers who build custom wire assemblies or interface modular sensors with circuit boards. It is intended for users who need a varied assortment of standard 2.54mm pitch connectors in 2 to 5 pin layouts.
Key Features
- 230-Piece Assortment PackSupplies a varied quantity of multi-pin housings and terminal pins for multiple wiring builds.
- 2.54mm Standard PitchAligns with standard prototype circuit boards, breadboards, and standard pin header spacing.
- 2/3/4/5 Pin Housing OptionsCovers common pin count needs for power leads, simple sensors, and serial communication lines.
- Female Pin Header TerminalsEnables creation of socketed wire ends for modular connection to male headers.
- Protective Adapter HousingsInsulates metallic wire pins to prevent accidental short circuits between adjacent wires.
Technical Specifications
| Total Piece Count | 230 pieces |
| Pin Pitch Spacing | 2.54mm |
| Connector Type | JST-PH Compatible Housing & Female Pin Header |
| Pin Configurations | 2-Pin, 3-Pin, 4-Pin, 5-Pin |
| Terminal Gender | Female Crimp Pin Terminals |
| Wire Included | Not specified in kit contents |
| Crimping Tool Included | Not specified in product data |
Pros & Cons
Pros
- Covers multiple common pin counts (2, 3, 4, and 5-pin) in one boxed assortment.
- Standard 2.54mm pitch spacing fits common microcontroller and circuit board header pins.
- Includes 230 total pieces, reducing the need to buy individual small connector packs for small projects.
Cons
- Requires a suitable micro terminal crimping tool for installation (not specified as included).
- Compatible wire gauge range is not explicitly detailed in available specification data.
FAQ
The kit features standard 2.54mm pitch spacing, matching standard circuit board header pins.
No, wire cables are not specified as included; the package consists of plastic connector housings and metallic female terminal pins.
A crimping tool is not specified in the kit contents and must be sourced separately for pin installation.
The assortment provides 2-pin, 3-pin, 4-pin, and 5-pin plastic connector housings along with female pin header crimps.
Final Verdict
A practical component kit for makers who build custom electronics, requiring clean 2.54mm female terminal interconnects in 2P, 3P, 4P, or 5P configurations. Skip this kit if you need pre-assembled wire cables or do not have access to a terminal crimping tool.